Arduino Uno (DIP) Advanced Learning Starter Kit

৳ 3,050.00

In stock

SKU: ARD0008 Categories: , Tags: , ,

 

This Arduino UNO (DIP) Advanced Learning Kit is great for absolute beginners. The kit comes with numbered components that would create multiple unique projects from a blinking LED to advanced electronics project. This UNO kit, that it inculdes all the primary components need to start with Arduino. Another good thing is that this kit also inculdes somes extra parts like LEDs, jumper wires, resistors around. Beginners can learn the basics of Arduino programming as well as the expert in programming. From this kit, you will get what Arduino is all about and how it is used. Whether you are a beginner or already have experience with Arduino under your belt, This Arduino beginners kit will be a fun way to expand your knowledge. This kit includes everything you need to get started with electronics using an Arduino and a lot of things that will take you from a beginner to an enthusiast. It includes all of the basics: a Arduino Uno R3 (DIP), Multiple Sensos, Display, Stepper Motor, Different Module, breadboard, cables, LEDs, resistors, pushbutton, switches etc.

Features :

  1. All-in-one kit, a great starter kit for learning to code.
  2. Great for Starting with Arduino Programming
  3. Variety of components are included in this pack to try out different projects.
  4. The kit comes with quality components assured 

Package Includes:

1X Arduino Uno R3 (DIP) + USB Cable
1X 30Pcs/pack Breadboard Jumpers
1X 830 Point Breadboard
10X LED (Red, Green, Yellow)
10X Resistors (1K Ohm, 10K Ohm, 220 Ohm)
1X 10 Pin Male to Female Jumper Wire
1X 10K Potentiometer
1X Active Buzzer
1X Passive Buzzer
1X 74HC595N
1X Infrared Receiving Head
1X LM35DZ
2X Roll Ball Switch
3X 5mm LDR
5X Button Switch with Cap
1X IR Remote Control
1X Seven Segment 1 Digit (0.56 inch)
1X Seven Segment 4 digit (0.36 inch)
1X 8*8 Dot Matrix
1X UNL2003 Driver Board
1X 5V Stepper Motor
1X SG90
1X LCD1602 + 40 Pin Male Header Connector (Unsoldered)
1X Joystick; 1X DHT11 Digital Temperature and Humidity Sensor
1X Water Sensor
1X RFID Module
1X RFID Key Ring
1X RFID Card
1X Sound Module
1X 1 Road Relay Module
1X RTC Module
1X 16 Buttons Matrix Keyboard
1X RGB Three Color Module
1X 9V Battery Connector

 

  • Microcontroller: ATmega328P (DIP)
  • Operating Voltage: 5V
  • Input Voltage (recommended): 7-12V
  • Input Voltage (limit): 6-20V
  • Digital I/O Pins: 14 (of which 6 provide PWM output)
  • PWM Digital I/O Pins: 6
  • Analog Input Pins: 6
  • DC Current per I/O Pin: 20 mA
  • DC Current for 3.3V Pin: 50 mA
  • Flash Memory: 32 KB (ATmega328P) of which 0.5 KB used by bootloader
  • SRAM: 2 KB (ATmega328P)
  • EEPROM: 1 KB (ATmega328P)
  • Clock Speed: 16 MHz
  • LED_BUILTIN: 13
  • Length: 68.6 mm
  • Width: 53.4 mm
  • Weight: 25 g

Do you want to learn Arduino in Bangla? You can watch our Arduino Bangla Tutorial in your official Youtube Channel: Naba Tech World. You can also read our Bangla Blog Post to know more about Arduino.

Our Youtube Channel: Naba Tech World

Arduino Tutorial Playlist: Arduino Bangla Tutorial

Arduino Related Article: Arduino Bangla Article

You can also watch some Arduino Based Projects from this link.